2017-12-29 17:27:53 +0100  Pali Rohár <pali.rohar@gmail.com>

	* Release version 2.0

2017-12-29 17:10:01 +0100  Pali Rohár <pali.rohar@gmail.com>

	* udflabel: Call first fdatasync() only when write operation happened

2017-12-28 22:46:44 +0100  Pali Rohár <pali.rohar@gmail.com>

	* configure: Remove unused headers from AC_CHECK_HEADERS

2017-12-28 22:46:30 +0100  Pali Rohár <pali.rohar@gmail.com>

	* all: Remove unneeded include malloc.h

2017-12-28 22:46:10 +0100  Pali Rohár <pali.rohar@gmail.com>

	* all: Update copyrights to reflect changes

2017-12-28 22:24:54 +0100  Pali Rohár <pali.rohar@gmail.com>

	* AUTHORS: Update file to reflect changes

2017-12-28 22:24:08 +0100  Pali Rohár <pali.rohar@gmail.com>

	* Makefile: Remove automatically added file ChangeLog

2017-12-28 21:38:26 +0100  Pali Rohár <pali.rohar@gmail.com>

	* doc/mkudffs: Update manpage to reflect all changes

	  Add new section about compatibility and bugs.

2017-12-28 21:38:01 +0100  Pali Rohár <pali.rohar@gmail.com>

	* doc/udfinfo: Update manpage

	  Remove also section UDF LABEL AND UUID as it is same as in udflabel.8 and
	  add proper references.

2017-12-28 21:37:43 +0100  Pali Rohár <pali.rohar@gmail.com>

	* doc/udflabel: Update manpage

2017-12-28 19:10:47 +0100  Pali Rohár <pali.rohar@gmail.com>

	* udflabel: Fix typo

2017-12-28 19:03:50 +0100  Pali Rohár <pali.rohar@gmail.com>

	* mkudffs: Fix blocksize detection of block devices

2017-12-27 21:55:15 +0100  Pali Rohár <pali.rohar@gmail.com>

	* mkudffs: Ensure that file descriptors 0, 1 and 2 are open

2017-12-27 21:50:27 +0100  Pali Rohár <pali.rohar@gmail.com>

	* udflabel: Ensure that file descriptors 0, 1 and 2 are open

2017-12-27 21:20:51 +0100  Pali Rohár <pali.rohar@gmail.com>

	* udflabel: Reject overwriting mounted devices

	  When changing UDF label it is needed overwrite more blocks, including root
	  directory. Changing UDF label on mounted filesystem can misbehave kernel
	  UDF driver which can lead to data corruption.

	  Use same reopen scheme via /proc as mkudffs to achieve race-free read-write
	  mode with O_EXCL for block devices.

2017-12-27 17:17:35 +0100  Pali Rohár <pali.rohar@gmail.com>

	* udflabel: Add new option -n/--no-write to just simulate

2017-12-27 16:41:21 +0100  Pali Rohár <pali.rohar@gmail.com>

	* mkudffs: Add new option -n/--no-write to just simulate

2017-12-26 23:12:58 +0100  Pali Rohár <pali.rohar@gmail.com>

	* mkudffs: Add new option --new-file which enforce creating a new image file

2017-12-26 21:50:09 +0100  Pali Rohár <pali.rohar@gmail.com>

	* mkudffs: Update help

2017-12-26 21:48:09 +0100  Pali Rohár <pali.rohar@gmail.com>

	* udflabel: Cosmetic change

2017-12-25 21:09:48 +0100  Pali Rohár <pali.rohar@gmail.com>

	* udflabel: Synchronize after updating VDS

2017-12-25 20:29:40 +0100  Pali Rohár <pali.rohar@gmail.com>

	* cdrwtool: Correctly initialize disc size

2017-12-25 19:56:24 +0100  Pali Rohár <pali.rohar@gmail.com>

	* udfinfo: Try to read some blocks also above CDROM_LAST_WRITTEN

	  Sometimes CDROM_LAST_WRITTEN returns less blocks as really written.

2017-12-25 19:52:08 +0100  Pali Rohár <pali.rohar@gmail.com>

	* mkudffs: For CD/DVD/BD discs put VAT block to the end of track which must have at least 300 blocks

2017-12-24 16:30:26 +0100  Pali Rohár <pali.rohar@gmail.com>

	* pktsetup: Add udev rules file for automatic managing of packet writing devices

2017-12-24 16:08:02 +0100  Pali Rohár <pali.rohar@gmail.com>

	* pktsetup: Allow to remove mapping specified also by cd-rom major:minor device

2017-12-24 15:12:54 +0100  Pali Rohár <pali.rohar@gmail.com>

	* pktsetup: Set return value for pktsetup -s

2017-12-24 14:46:30 +0100  Pali Rohár <pali.rohar@gmail.com>

	* pktsetup: Allow to setup cd-rom device also by major:minor numbers

2017-12-24 14:11:45 +0100  Pali Rohár <pali.rohar@gmail.com>

	* mkudffs: Fix generating images with VAT and less then 770 blocks

2017-12-21 11:32:14 +0100  Pali Rohár <pali.rohar@gmail.com>

	* unicode: Throw fatal error message if invalid or incomplete UTF-8 sequence was specified

	  There is no way to recover and mbstowcs() for UTF-8 encoding do same thing.

2017-12-21 11:21:05 +0100  Pali Rohár <pali.rohar@gmail.com>

	* unicode: Unify error messages

2017-12-21 10:05:03 +0100  Pali Rohár <pali.rohar@gmail.com>

	* udflabel: Maximal supported UDF revision is 2.60

2017-12-20 19:52:40 +0100  Pali Rohár <pali.rohar@gmail.com>

	* udflabel: Add new tool udflabel which can show or change UDF label

2017-12-19 00:21:12 +0100  Pali Rohár <pali.rohar@gmail.com>

	* mkudffs: Fix error message

2017-12-19 00:20:39 +0100  Pali Rohár <pali.rohar@gmail.com>

	* udfinfo: Fix setting descriptor offsets

2017-12-19 00:20:11 +0100  Pali Rohár <pali.rohar@gmail.com>

	* udfinfo: Unify error messages

2017-12-18 22:08:11 +0100  Pali Rohár <pali.rohar@gmail.com>

	* udfinfo: Fix endianity for Partition Access Type

2017-12-18 22:07:49 +0100  Pali Rohár <pali.rohar@gmail.com>

	* udfinfo: Close file after we finish reading

2017-12-18 18:32:55 +0100  Pali Rohár <pali.rohar@gmail.com>

	* pktsetup: Rewrite pkt_device check to be more friendly for static code analysis

2017-12-17 23:55:57 +0100  Pali Rohár <pali.rohar@gmail.com>

	* mkudffs: Move RVDS, so there would be space also between RVDS and last AVDP

2017-12-17 23:53:34 +0100  Pali Rohár <pali.rohar@gmail.com>

	* mkudffs: Fix size calculation of Space Bitmap Descriptor

2017-12-17 23:02:43 +0100  Pali Rohár <pali.rohar@gmail.com>

	* mkudffs: Do not write second AVDP for small disks

	  For small disks with less then 3072 blocks write only first and third AVDP.
	  Two AVDPs are enough for UDF and it would increase partition space by about
230 blocks. For large disks 230 blocks is just small percentage of whole
	  capacity.

2017-12-17 22:08:33 +0100  Pali Rohár <pali.rohar@gmail.com>

	* udfinfo: Add sane memory allocation checks for length of LVD and USD

2017-12-17 22:07:03 +0100  Pali Rohár <pali.rohar@gmail.com>

	* udfinfo: Fix scanning VDS

	  Prevent infinite loop by disabling backward jumps on disk.

2017-12-17 21:52:18 +0100  Pali Rohár <pali.rohar@gmail.com>

	* udfinfo: Add checks for number of partitions and length of IU in LVID

	  Sane checks to prevent allocating too many memory.

2017-12-17 21:19:50 +0100  Pali Rohár <pali.rohar@gmail.com>

	* udfinfo: Fix possible integer overflow in count_table_blocks

2017-12-17 17:22:39 +0100  Pali Rohár <pali.rohar@gmail.com>

	* udfinfo: Fix option constants

2017-12-17 17:21:58 +0100  Pali Rohár <pali.rohar@gmail.com>

	* udfinfo: Fix scanning LVID

	  Fix scanning sequence of LVID and prevent infinite loop by disallowing
	  backward jumps on disk.

2017-12-17 17:20:06 +0100  Pali Rohár <pali.rohar@gmail.com>

	* udfinfo: Fix VAT error message

2017-12-16 21:29:56 +0100  Pali Rohár <pali.rohar@gmail.com>

	* pktsetup: Unify error messages

2017-12-16 21:29:04 +0100  Pali Rohár <pali.rohar@gmail.com>

	* pktsetup: Disable help for pktcdvd < 0.2.0

	  pktcdvd >= 0.2.0 is in linux kernel since 2.6.10, so probably nobody use it.

2017-12-16 21:28:03 +0100  Pali Rohár <pali.rohar@gmail.com>

	* pktsetup: Make dev_name argument for setup optional

	  udev already creates device nodes in /dev, therefore it is not needed to
	  create them in pktsetup. So let dev_name optional and when is absent do not
	  create device name in /dev.

2017-12-16 20:44:55 +0100  Pali Rohár <pali.rohar@gmail.com>

	* mkudffs: Update help

2017-12-16 20:34:57 +0100  Pali Rohár <pali.rohar@gmail.com>

	* mkudffs: Fix types

2017-12-16 20:25:28 +0100  Pali Rohár <pali.rohar@gmail.com>

	* mkudffs: Set SB descriptor CRC length to 8 as is recommended by UDF 2.60 (2.3.8.1)

2017-12-16 20:20:23 +0100  Pali Rohár <pali.rohar@gmail.com>

	* mkudffs: Add new option --mode for specifying permissions of the root directory

2017-12-16 20:14:04 +0100  Pali Rohár <pali.rohar@gmail.com>

	* mkudffs: Fix processing --uid and --gid options

	  UDF uid and gid are 32bit unsigned integer, UINT32_MAX means invalid (not
	  specified) user. Allow special value -1 which would be mapped to invalid
	  user as before (because options were signed integers).

	  Both options needs to be applied only for the root directory, not for all
	  file entries.

2017-12-16 20:12:47 +0100  Pali Rohár <pali.rohar@gmail.com>

	* mkudffs: Rewrite --vsid length check to be more friendly for static code analysis

2017-12-16 20:10:06 +0100  Pali Rohár <pali.rohar@gmail.com>

	* mkudffs: Unify error messages

2017-12-16 20:04:38 +0100  Pali Rohár <pali.rohar@gmail.com>

	* libudffs: Unify error messages

2017-12-16 20:04:05 +0100  Pali Rohár <pali.rohar@gmail.com>

	* cdrwtool: Set appname

2017-12-16 20:03:21 +0100  Pali Rohár <pali.rohar@gmail.com>

	* configure: Do not link libreadline to all executables

	  AC_CHECK_LIB by default modifies LIBS and put there found library. Use
	  space (= empty script) to overwrite this default behavior.

2017-12-16 20:01:28 +0100  Pali Rohár <pali.rohar@gmail.com>

	* mkudffs: Add missing short option -m to getopt_long

2017-12-16 20:00:46 +0100  Pali Rohár <pali.rohar@gmail.com>

	* mkudffs: Create file image after validating all options

	  This would prevent creating empty file on disk when UDF disk image is not
	  possible with selected configuration.

2017-12-16 19:33:04 +0100  Pali Rohár <pali.rohar@gmail.com>

	* mkudffs: Add checks for --media-type option

2017-12-16 19:28:17 +0100  Pali Rohár <pali.rohar@gmail.com>

	* mkudffs: Add experimental support for Blu-Ray Disc Recordable with UDF 2.50

	  BD-R does not use UDF 2.50 Metadata Partition, just only VAT. Therefore
	  mkudffs should be able to generate correct image.

2017-12-16 19:25:42 +0100  Pali Rohár <pali.rohar@gmail.com>

	* mkudffs: Add minimal support for UDF revision 2.50 and 2.60

	  Currently it is supported only for configuration which does not use
	  Metadata Partition.

2017-12-16 19:21:40 +0100  Pali Rohár <pali.rohar@gmail.com>

	* mkudffs: Add support for DVD-R media type

2017-12-16 19:21:21 +0100  Pali Rohár <pali.rohar@gmail.com>

	* mkudffs: Add support for CD-ROM media type

2017-12-16 19:14:36 +0100  Pali Rohár <pali.rohar@gmail.com>

	* mkudffs: Fix sizing and alignment for CD-R, CD-RW and DVD-RW discs

2017-12-16 18:45:57 +0100  Pali Rohár <pali.rohar@gmail.com>

	* mkudffs: Fix support for VAT and CD-R media type

	  VAT file itself needs to be put into first partition and Strategy type 4096
	  cannot be used in VAT, so disallow this combination.

	  Now udfct does not report any error and Linux kernel is finally able to
	  mount generated CD-R images.

2017-12-16 18:37:37 +0100  Pali Rohár <pali.rohar@gmail.com>

	* mkudffs: Correctly initialize UDF revision in VAT

2017-12-16 18:22:12 +0100  Pali Rohár <pali.rohar@gmail.com>

	* mkudffs: Allow to enable VAT via --vat option

	  Before it was available only for CD-R discs.

2017-12-16 18:01:02 +0100  Pali Rohár <pali.rohar@gmail.com>

	* mkudffs: Missing break

2017-12-16 14:31:07 +0100  Pali Rohár <pali.rohar@gmail.com>

	* mkudffs: Add new option --sparspace for specifying number of entries in Sparing Table

2017-12-16 14:28:40 +0100  Pali Rohár <pali.rohar@gmail.com>

	* mkudffs: Allow to enable Sparing Table via --spartable option

	  Before it was available only for CD-RW and DVD-RW discs.

2017-12-16 14:26:22 +0100  Pali Rohár <pali.rohar@gmail.com>

	* mkudffs: Fix calculation of entries in Sparing Table

	  Ensure that number of entries is not more then allocated space for them.

2017-12-16 14:16:14 +0100  Pali Rohár <pali.rohar@gmail.com>

	* mkudffs: Maximize available partition space

	  Optimize splitting algorithm to get more space for data storage. Move MVDS,
	  LVID and when possible also STABLE and SSPACE before first ANCHOR. And then
	  choose maximal available free space for partition/data storage.

2017-12-16 14:06:41 +0100  Pali Rohár <pali.rohar@gmail.com>

	* mkudffs: Ensure that one empty block is always after VRS

	  It is required by UDF.

2017-12-16 13:42:03 +0100  Pali Rohár <pali.rohar@gmail.com>

	* libudffs: Fix function prev_extent_size to align blocks correctly

	  We want to align start location of the block, not end.

2017-12-16 13:34:07 +0100  Pali Rohár <pali.rohar@gmail.com>

	* udfinfo: Reduce warnings for VAT disks

2017-12-16 13:22:20 +0100  Pali Rohár <pali.rohar@gmail.com>

	* mkudffs: Add short option -m for --media-type

2017-12-15 18:13:23 +0100  Pali Rohár <pali.rohar@gmail.com>

	* mkudffs: Completely remove option --bridge

	  Its purpose was to generate UDF Bridge format, combination of ISO 9660 +
	  OSTA UDF, but because mkudffs does not support ISO 9660 it never worked...

2017-12-14 20:40:58 +0100  Pali Rohár <pali.rohar@gmail.com>

	* mkudffs: Fix includes

2017-12-14 20:12:54 +0100  Pali Rohár <pali.rohar@gmail.com>

	* mkudffs: Fix crashes in udf_alloc_blocks

	  Add checks that there is a free block.

2017-12-14 18:03:03 +0100  Pali Rohár <pali.rohar@gmail.com>

	* udfinfo: Show vatblock in output for VAT disks

2017-12-14 18:00:26 +0100  Pali Rohár <pali.rohar@gmail.com>

	* udfinfo: Fix possible NULL pointer dereference for VAT disks

2017-12-14 00:45:08 +0100  Pali Rohár <pali.rohar@gmail.com>

	* udfinfo: Add missing -- for options in error messages

2017-12-14 00:43:23 +0100  Pali Rohár <pali.rohar@gmail.com>

	* udfinfo: Add support for reading VAT stored inside of ICB

2017-12-14 00:33:16 +0100  Pali Rohár <pali.rohar@gmail.com>

	* udfinfo: Show UDF integrity in output

2017-12-13 23:19:31 +0100  Pali Rohár <pali.rohar@gmail.com>

	* udfinfo: Fix validation of --blocksize

2017-12-13 20:37:45 +0100  Pali Rohár <pali.rohar@gmail.com>

	* udfinfo: Fix printing accesstype

2017-12-09 03:54:29 +0100  Pali Rohár <pali.rohar@gmail.com>

	* udfinfo: Fix autodetection of UDF disks with blocksize above 4096

2017-12-09 03:53:34 +0100  Pali Rohár <pali.rohar@gmail.com>

	* udfinfo: Fix check for reading beyond end of disk

2017-12-09 03:00:39 +0100  Pali Rohár <pali.rohar@gmail.com>

	* libudffs: Fix size and signedness of blocksize and blkssz

2017-12-08 18:22:44 +0100  Pali Rohár <pali.rohar@gmail.com>

	* udfinfo: Autodetect also UDF disks with blocksize values: 8192, 16384, 32768

2017-12-08 18:21:59 +0100  Pali Rohár <pali.rohar@gmail.com>

	* mkudffs: Allow specifying blocksize values: 8192, 16384, 32768

2017-12-08 18:21:04 +0100  Pali Rohár <pali.rohar@gmail.com>

	* libudffs: Remove unused member blocksize_bits

2017-12-08 18:20:33 +0100  Pali Rohár <pali.rohar@gmail.com>

	* mkudffs: Use disc->blocksize instead of disc->blocksize_bits

2017-12-08 18:19:34 +0100  Pali Rohár <pali.rohar@gmail.com>

	* cdrwtool: Use disc->blocksize instead of disc->blocksize_bits

2017-12-08 18:15:40 +0100  Pali Rohár <pali.rohar@gmail.com>

	* mkudffs: Use EXT_LENGTH_MASK instead of hardcoded constant

2017-12-08 18:12:29 +0100  Pali Rohár <pali.rohar@gmail.com>

	* libudffs: Remove version-info

	  Fixes libtool: warning: '-version-info/-version-number' is ignored for convenience libraries

2017-12-07 23:58:44 +0100  Pali Rohár <pali.rohar@gmail.com>

	* mkudffs: Improve CHS geometry in MBR

	  Use HDIO_GETGEO ioctl for reading disk geometry. Fallback to LBA-Assist
	  Translation when HDIO_GETGEO ioctl fails.

2017-11-28 00:02:20 +0100  Pali Rohár <pali.rohar@gmail.com>

	* udfinto: Increase limit for size of LVID and number of descriptors in VDS

	  WORM media have bigger limits and udfinfo was not able to parse them.

2017-11-27 23:58:28 +0100  Pali Rohár <pali.rohar@gmail.com>

	* udfinfo: Add a new output key behindblocks

	  It will contains number of blocks which are after the last block used by
	  UDF filesystem. Therefore these blocks are unused by UDF filesystem itself
	  and just waste space of the disk. GUI tools like Gparted would like to know
	  this information and provide it to user as unallocated space.

2017-11-26 17:18:53 +0100  Pali Rohár <pali.rohar@gmail.com>

	* mkudffs: Update help for packetlen option

2017-11-26 16:55:31 +0100  Pali Rohár <pali.rohar@gmail.com>

	* udfinfo: Fix overflow in count_table_blocks

2017-11-26 16:00:06 +0100  Pali Rohár <pali.rohar@gmail.com>

	* udfinfo: Try to fix problems with strict-aliasing rules in function scan_vds

2017-11-26 15:53:53 +0100  Pali Rohár <pali.rohar@gmail.com>

	* udfinfo: Store sbd directly into struct instead of long int buffer

	  This should fix breakage of strict-aliasing rules.

2017-11-26 15:42:39 +0100  Pali Rohár <pali.rohar@gmail.com>

	* udfinfo: Fix overflowing or truncating of st_len value

2017-11-26 15:38:13 +0100  Pali Rohár <pali.rohar@gmail.com>

	* udfinfo: Fix overflowing or truncating of return value from count_table_blocks

2017-11-26 15:35:04 +0100  Pali Rohár <pali.rohar@gmail.com>

	* udfinfo: Fix overflowing or truncating of use_len value

2017-11-26 15:11:56 +0100  Pali Rohár <pali.rohar@gmail.com>

	* udfinfo: Fix warning: comparison between signed and unsigned integer expressions

2017-11-26 15:03:56 +0100  Pali Rohár <pali.rohar@gmail.com>

	* udfinfo: Add a new tool udfinfo which shows various information about UDF

	  Currently it is unable to read Virtual Allocation Table, Metadata Partition
	  and Pseudo-overwritable discs so some information are not always available.

2017-11-26 15:03:44 +0100  Pali Rohár <pali.rohar@gmail.com>

	* libudffs: Add check in function set_extent

2017-11-26 15:03:32 +0100  Pali Rohár <pali.rohar@gmail.com>

	* libudffs: Move function gen_uuid_from_vol_set_ident to file misc.c

2017-11-26 15:03:15 +0100  Pali Rohár <pali.rohar@gmail.com>

	* libudffs: gen_uuid_from_vol_set_ident: Do not complain when hex digits are not lowercase

2017-11-26 13:44:06 +0100  Pali Rohár <pali.rohar@gmail.com>

	* wrudf: Move it back from sbin to bin

	  It better fits into bin section as it is a user tool, not system
	  administration tool.

2017-11-26 11:19:41 +0100  Pali Rohár <pali.rohar@gmail.com>

	* mkudffs: Remove check for valid size of MBR partition

	  It does not work as disc.blocks is already truncated to 32 bit.

2017-11-25 13:43:14 +0100  Pali Rohár <pali.rohar@gmail.com>

	* cdrwtool: Set default UDF revision to 1.50

2017-11-24 22:26:56 +0100  Pali Rohár <pali.rohar@gmail.com>

	* libudffs: Update comments for RVDS and LVID

2017-11-24 22:24:47 +0100  Pali Rohár <pali.rohar@gmail.com>

	* mkudffs: Rename PVDS acronym to MVDS

	  Correct name is Main Volume Descriptor Sequence. Not to be confused with
	  PVD (Primary Volume Descriptor).

2017-11-19 15:58:37 +0100  Pali Rohár <pali.rohar@gmail.com>

	* mkudffs: Do not write second anchor point if it would be before first one

	  Before first anchor point is stored Volume Descriptor Sequence and Volume
	  Recognition Sequence and also reserved 32kB boot area, so prevent possible
	  overlap.

2017-11-19 15:39:01 +0100  Pali Rohár <pali.rohar@gmail.com>

	* mkudffs: Fix parsing and printing udf revision in decimal format

2017-11-19 14:22:40 +0100  Pali Rohár <pali.rohar@gmail.com>

	* mkudffs: By default set FLAG_EFE

	  Default UDF revision is 2.01 for which EFE should be used. mkudffs already
	  expects that EFE is set for revision 2.01.

	  Now udfct does not report any error or warning for newly formatted media.

2017-11-19 14:07:01 +0100  Pali Rohár <pali.rohar@gmail.com>

	* mkudffs: Fix minimum LVID size

	  For Rewriteable or Overwriteable media LVID should be at least 8K length.
	  udfct reports this as an validation error.

2017-11-19 03:31:33 +0100  Pali Rohár <pali.rohar@gmail.com>

	* cdrwtool: Pass file names via pointer and get rid off NAME_MAX

2017-11-19 03:18:59 +0100  Pali Rohár <pali.rohar@gmail.com>

	* mkudffs: Pass device name via pointer and get rid off NAME_MAX

2017-11-19 03:00:36 +0100  Pali Rohár <pali.rohar@gmail.com>

	* mkudffs: Remove debug comment output

2017-11-19 00:41:55 +0100  Pali Rohár <pali.rohar@gmail.com>

	* mkudffs: Fix udf_alloc_bitmap_blocks to not access invalid memory

	  Inline functions udf_find_next_zero_bit and udf_find_next_one_bit read
	  memory per 4 bytes. Space bitmap does not have to be aligned to 4 bytes, so
	  do last read operation by memcpy with correct remaining size.

2017-11-18 19:19:42 +0100  Pali Rohár <pali.rohar@gmail.com>

	* Revert "libudffs: Fix reading from invalid memory"

	  This reverts commit b5e774febc98d97e557d1e1bce19384f1b7dccb6.

2017-11-16 00:58:51 +0100  Pali Rohár <pali.rohar@gmail.com>

	* ecma_167: Fix GP_PARTITION_MAP_TYPE_1 define name

2017-11-16 00:57:53 +0100  Pali Rohár <pali.rohar@gmail.com>

	* unicode: Add const to function parameters

2017-11-14 00:15:58 +0100  Pali Rohár <pali.rohar@gmail.com>

	* unicode: Fix function decode_string for FLAG_UNICODE8 and FLAG_UNICODE16

2017-11-12 03:14:09 +0100  Pali Rohár <pali.rohar@gmail.com>

	* mkudffs: Correctly initialize lvid in VAT as specified via --lvid

2017-11-12 02:37:25 +0100  Pali Rohár <pali.rohar@gmail.com>

	* cdrwtool: Do not truncate device or file name and rather throw fatal error

2017-11-12 02:26:48 +0100  Pali Rohár <pali.rohar@gmail.com>

	* mkudffs: Do not truncate device name and rather throw fatal error

2017-10-15 12:45:50 +0200  Pali Rohár <pali.rohar@gmail.com>

	* mkudffs: Mark local functions and structures as static

2017-10-15 12:36:56 +0200  Pali Rohár <pali.rohar@gmail.com>

	* mkudffs: Style fixes

2017-10-15 12:33:28 +0200  Pali Rohár <pali.rohar@gmail.com>

	* mkudffs: Add warning that UDF filesystems formatted on partition are not compatible with Apple systems

2017-10-15 12:32:48 +0200  Pali Rohár <pali.rohar@gmail.com>

	* mkudffs: Fix detection of the partition vs whole disk

2017-10-10 21:36:16 +0200  Jakub Wilk <jwilk@jwilk.net>

	* doc/mkudffs.8: Fix typos

2017-10-07 22:21:42 +0200  Pali Rohár <pali.rohar@gmail.com>

	* unicode: Fix checking for valid UTF-8 sequence in encode_utf8 function

2017-09-30 11:53:10 +0200  Pali Rohár <pali.rohar@gmail.com>

	* wrudf: Fix another warning: dereferencing type-punned pointer will break strict-aliasing rules

2017-09-30 11:44:20 +0200  Pali Rohár <pali.rohar@gmail.com>

	* wrudf: Fix another warning: dereferencing type-punned pointer will break strict-aliasing rules

2017-09-30 11:09:47 +0200  Pali Rohár <pali.rohar@gmail.com>

	* travis: Make -Wstrict-aliasing warning fatal

2017-09-30 11:08:55 +0200  Pali Rohár <pali.rohar@gmail.com>

	* mkudffs: Fix warning: dereferencing type-punned pointer will break strict-aliasing rules

2017-09-30 11:02:55 +0200  Pali Rohár <pali.rohar@gmail.com>

	* wrudf: Fix warning: dereferencing type-punned pointer will break strict-aliasing rules

2017-09-30 01:02:12 +0200  Pali Rohár <pali.rohar@gmail.com>

	* travis: Test with more compilers (gcc, clang, tcc) and install only needed packages

2017-09-30 00:44:59 +0200  Pali Rohár <pali.rohar@gmail.com>

	* wrudf: Fix compile errors: blockBuffer, newVATindex, prevVATlbn defined twice

	  Detected by tcc compiler.

2017-09-30 00:39:22 +0200  Pali Rohár <pali.rohar@gmail.com>

	* unicode: Prefer 16-bit OSTA Compressed Unicode format for strings with 0x80-0xFF characters

	  blkid from util-linux prior to version 2.30 did not decode non-ASCII
	  strings in 8-bit OSTA Compressed Unicode format correctly. Therefore if it
	  is possible encode all non-ASCII strings in 16-bit OSTA Compressed Unicode
	  format.

2017-09-28 09:54:14 +0200  Pali Rohár <pali.rohar@gmail.com>

	* unicode: In function decode_locale() handle EILSEQ error and replace non-representable character by '?'

2017-09-10 15:38:34 +0200  Pali Rohár <pali.rohar@gmail.com>

	* mkudffs: For non-removable disks without partition table use by default --bootarea=mbr

2017-07-23 14:38:26 +0200  Pali Rohár <pali.rohar@gmail.com>

	* mkudffs: Allow 126 (resp. 63) characters in --label option

	  Longer --vid would be truncated.

2017-07-09 13:12:54 +0200  Pali Rohár <pali.rohar@gmail.com>

	* travis: Add jobs for 32 bit builds

2017-07-06 12:53:26 +0200  Pali Rohár <pali.rohar@gmail.com>

	* mkudffs: Disallow opening block device which is mounted or already in use

	  This would prevent user to start formatting disk which is already mounted,
	  used by kernel or exclusively open by userspace (e.g. another mkudffs
	  instance) to prevent damage of data.

	  Implementation of opening block device exclusively is race-free when /proc
	  is available. When /proc is not available then there is a race condition
	  between stat() and following open() call.

	  New file disk image is also created exclusively to prevent creating new
	  file by more processes. Processing existing file disk image is not changed.

2017-07-06 00:48:27 +0200  Pali Rohár <pali.rohar@gmail.com>

	* mkudffs: Parse and show UDF revision option in decimal notation

	  Parsing UDF revision as hexadecimal number would still work.

2017-07-06 00:17:42 +0200  Pali Rohár <pali.rohar@gmail.com>

	* mkudffs: Fix parsing numeric options

	  Throw error when non-numeric value or invalid number is specified for
	  numeric option.

2017-07-06 00:14:18 +0200  Pali Rohár <pali.rohar@gmail.com>

	* mkudffs: Do not suggest to change blocksize

	  UDF blocksize must match logical sector size of disk.

2017-06-30 23:57:28 +0200  Pali Rohár <pali.rohar@gmail.com>

	* mkudffs: Fix endianity in udf_set_version()

2017-06-26 00:10:24 +0200  Pali Rohár <pali.rohar@gmail.com>

	* travis: Compile with -Wno-error=unused-function

2017-06-26 00:04:25 +0200  Pali Rohár <pali.rohar@gmail.com>

	* travis: Compile with -Werror -Wno-error=strict-aliasing

2017-06-25 23:52:55 +0200  Pali Rohár <pali.rohar@gmail.com>

	* cdrwtool: Check for signal value in sig_progress()

2017-06-25 23:52:34 +0200  Pali Rohár <pali.rohar@gmail.com>

	* udffsck: Remove unused arguments

2017-06-25 23:49:31 +0200  Pali Rohár <pali.rohar@gmail.com>

	* mkudffs: Remove unused parameter 'pspace' from udf_alloc_bitmap_blocks() and udf_alloc_table_blocks() functions

2017-06-25 23:45:31 +0200  Pali Rohár <pali.rohar@gmail.com>

	* all: Remove unused parameter 'disc' from set_desc() function

2017-06-25 23:40:48 +0200  Pali Rohár <pali.rohar@gmail.com>

	* mkudffs: Use typedef dchars where applicable

2017-06-25 14:51:42 +0200  Pali Rohár <pali.rohar@gmail.com>

	* wrudf: Correctly decode UDF file name

	  It is not stored as d-string, but rather as d-characters.

2017-06-25 14:22:51 +0200  Pali Rohár <pali.rohar@gmail.com>

	* wrudf: Correctly decode d-string fileSetIdent

	  Use decode_string which decodes d-string instead of decode_utf8 (which
	  decodes d-characters).

2017-06-25 13:20:43 +0200  Pali Rohár <pali.rohar@gmail.com>

	* wrudf: Use encode_locale instead of encode_utf8

	  Print all d-characters in current locale instead of UTF-8.

2017-06-25 12:01:06 +0200  Pali Rohár <pali.rohar@gmail.com>

	* mkudffs: Set default UDF uuid to zero

2017-06-25 11:20:05 +0200  Pali Rohár <pali.rohar@gmail.com>

	* mkudffs: Use gen_uuid_from_vol_set_ident for printing UDF uuid

2017-06-25 11:18:40 +0200  Pali Rohár <pali.rohar@gmail.com>

	* unicode: Add function gen_uuid_from_vol_set_ident for generating UDF uuid from Volume Set Identifier

	  Use same algorithm as in util-linux v2.30.

2017-06-25 11:07:17 +0200  Pali Rohár <pali.rohar@gmail.com>

	* mkudffs: Print label according to set charset flag

	  logicalVolIdent is d-string, not d-characters so decode_utf8 cannot be
	  directly used.

2017-06-24 21:47:31 +0200  Pali Rohár <pali.rohar@gmail.com>

	* mkudffs: Update help

2017-06-24 12:38:37 +0200  Pali Rohár <pali.rohar@gmail.com>

	* doc/mkudffs.8: Document new option --locale

2017-06-24 12:38:08 +0200  Pali Rohár <pali.rohar@gmail.com>

	* doc/mkudffs.8: Clarify encoding options

2017-06-24 10:47:57 +0200  Pali Rohár <pali.rohar@gmail.com>

	* mkudffs: Add new option --locale

	  It will treat ident string options as strings encoded according to current
	  locale settings. And make it by default instead of --utf8.

2017-06-24 10:44:04 +0200  Pali Rohár <pali.rohar@gmail.com>

	* unicode: Add new flag FLAG_LOCALE and functions for encoding/decoding dstrings according to current locale

2017-06-24 10:11:32 +0200  Pali Rohár <pali.rohar@gmail.com>

	* unicode: Allow calling encode_string and decode_string with NULL disc parameter

2017-06-23 19:55:28 +0200  Pali Rohár <pali.rohar@gmail.com>

	* mkudffs: Fix check for too long --vsid option

2017-06-23 19:50:00 +0200  Pali Rohár <pali.rohar@gmail.com>

	* mkudffs: Fix handling of empty dstrings

2017-06-23 19:45:49 +0200  Pali Rohár <pali.rohar@gmail.com>

	* unicode: Add support for processing empty strings in decode_string and encode_string

2017-06-23 19:41:23 +0200  Pali Rohár <pali.rohar@gmail.com>

	* unicode: Returns -1 (instead of 0) from all encode/decode functions on error

2017-06-23 13:35:02 +0200  Pali Rohár <pali.rohar@gmail.com>

	* mkudffs: Do not manually set length after calling encode_string()

	  Now it is done automatically by encode_string().

2017-06-23 13:31:31 +0200  Pali Rohár <pali.rohar@gmail.com>

	* unicode: encode/decode_utf8 functions work with d-characters and encode/decode_string with d-string

	  For d-characters use new dchars typedef and fix all functions to correctly
	  handle d-characters and d-string buffers.

2017-06-23 12:36:30 +0200  Pali Rohár <pali.rohar@gmail.com>

	* ecma_167: Add new typedef dchars for d-characters

	  Fixed-length d-string and variable-length d-characters are different types,
	  so correctly document it.

2017-06-23 12:08:05 +0200  Pali Rohár <pali.rohar@gmail.com>

	* ecma_167: Fix type of pathComponent.componentIdent, it is d-characters not d-string

2017-06-11 18:50:05 +0200  Pali Rohár <pali.rohar@gmail.com>

	* unicode: Fix function encode_string when FLAG_UNICODE8 or FLAG_UNICODE16 is used

	  It is needed to set length at last byte and erase remaining part of buffer.

2017-06-11 18:44:25 +0200  Pali Rohár <pali.rohar@gmail.com>

	* unicode: Fix function decode_string when FLAG_UNICODE8 or FLAG_UNICODE16 is used

	  We need to correctly decode dstring based on first byte.

2017-06-11 18:42:39 +0200  Pali Rohár <pali.rohar@gmail.com>

	* unicode: Fix buffer overflow in decode_utf8 and decode_string functions

	  Add new argument for specifying size of output buffer.

2017-06-11 18:35:48 +0200  Pali Rohár <pali.rohar@gmail.com>

	* unicode: Remove hdr argument from encode_* functions as it is not used anymore

2017-06-11 18:24:10 +0200  Pali Rohár <pali.rohar@gmail.com>

	* mkudffs: Fix --vsid and --uuid options to correctly compose OSTA Unicode d-strings

2017-06-08 08:39:47 +0200  Pali Rohár <pali.rohar@gmail.com>

	* mkudffs: Fix default block size

2017-06-08 08:32:37 +0200  Pali Rohár <pali.rohar@gmail.com>

	* mkudffs: Fix mbr ending_chs

2017-06-08 00:42:13 +0200  Pali Rohár <pali.rohar@gmail.com>

	* doc/mkudffs.8: Fix formatting

2017-06-08 00:41:38 +0200  Pali Rohár <pali.rohar@gmail.com>

	* mkudffs: For hard disk set default block size to 512

2017-05-21 19:45:20 +0200  Pali Rohár <pali.rohar@gmail.com>

	* mkudffs: Add new option --bootarea=mbr to fill MBR table into UDF boot area

	  There will be only one partition in MBR table which starts at sector 0
	  (includes MBR itself) and span whole disk device.

	  It is needed for hard disk compatibility with Microsoft Windows systems as
	  Windows does not recognize non-removable hard disk without MBR table.

	  On the other hand Apple Mac OS X systems does not recognize UDF filesystem
	  formatted on partition and to detect UDF correctly, filesystem must be
	  present from the beginning of disk. If MBR table is presnt then it is
	  ignored by Mac OS X.

2017-05-21 19:22:22 +0200  Pali Rohár <pali.rohar@gmail.com>

	* mkudffs: Add new option --bootarea=preserve|erase to preserve or erase UDF boot area

	  In most cases UDF boot area (first 32kB of disk) is not used and therefore
	  it is better to erase it. By default when mkudffs formatting hard disk will
	  erase UDF boot area which cleanup headers of previous filesystems. So hard
	  disk would not be false positive detected as other filesystem which was
	  there before formatting to UDF.

2017-05-20 10:14:39 +0200  Pali Rohár <pali.rohar@gmail.com>

	* mkudffs: Force uuid to be in lowercase hexadecimal digit format

2017-05-01 13:21:04 +0200  Pali Rohár <pali.rohar@gmail.com>

	* doc/wrudf.8: Specify correct manpage section (8)

2017-03-03 18:42:57 +0100  Pali Rohár <pali.rohar@gmail.com>

	* travis: Fix coverity job

2017-02-26 18:00:01 +0100  Pali Rohár <pali.rohar@gmail.com>

	* travis: Simplify configuration, move coverity_scan to matrix

2017-01-23 23:15:42 +0100  Pali Rohár <pali.rohar@gmail.com>

	* Release version 1.3

2017-01-23 23:14:44 +0100  Pali Rohár <pali.rohar@gmail.com>

	* Makefile.am: Include ChangeLog in dist tarball

2017-01-22 23:32:25 +0100  Pali Rohár <pali.rohar@gmail.com>

	* doc/mkudffs.8: Write info about --media-type=cdr, --closed and --packetlen

2017-01-22 14:48:00 +0100  Fabian Frederick <fabf@skynet.be>

	* configure: check readline earlier

	  Currently, we have to run autogen/configure/make to see missing library:

	  libtool: link: gcc -g -O2 -o wrudf wrudf.o wrudf-cmnd.o wrudf-desc.o
	  wrudf-cdrw.o wrudf-cdr.o ide-pc.o  ../libudffs/.libs/libudffs.a
	  -lreadline
	  /usr/bin/ld: cannot find -lreadline

	  This patch adds an error in configure.ac

	  Signed-off-by: Fabian Frederick <fabf@skynet.be>

2017-01-22 14:37:16 +0100  Pali Rohár <pali.rohar@gmail.com>

	* wrudf: Fix buffer overflows

2017-01-22 14:37:02 +0100  Pali Rohár <pali.rohar@gmail.com>

	* wrudf: Fix crash when readLine() return NULL (on EOF)

2017-01-22 13:15:03 +0100  Pali Rohár <pali.rohar@gmail.com>

	* doc: Move wrudf manpage to section 8

2017-01-22 13:14:35 +0100  Pali Rohár <pali.rohar@gmail.com>

	* all: Remove old ChangeLog files

2017-01-22 13:04:40 +0100  Pali Rohár <pali.rohar@gmail.com>

	* libudffs: Fix sources in Makefile.am

2017-01-22 13:03:57 +0100  Pali Rohár <pali.rohar@gmail.com>

	* wrudf: Remove old address in CONTACTS and update AUTHORS

2017-01-22 12:56:47 +0100  Pali Rohár <pali.rohar@gmail.com>

	* Makefile.am: Include autogen.sh and Doxyfile in dist tarball

2017-01-22 12:55:54 +0100  Pali Rohár <pali.rohar@gmail.com>

	* doc: Include manpages in dist tarball

2017-01-22 12:55:25 +0100  Pali Rohár <pali.rohar@gmail.com>

	* all: Remove hardcoded flag -D_LARGEFILE64_SOURCE

	  It is not needed anymore as autoconf's AC_SYS_LARGEFILE takes care of LFS.

2017-01-22 12:53:19 +0100  Pali Rohár <pali.rohar@gmail.com>

	* include: Remove unused file udf_lib.h

2017-01-21 16:15:40 +0100  Pali Rohár <pali.rohar@gmail.com>

	* travis: Set CFLAGS

2017-01-21 16:13:29 +0100  Pali Rohár <pali.rohar@gmail.com>

	* mkudffs: Do not use GNU old-style field designator extension

2017-01-21 15:43:34 +0100  Pali Rohár <pali.rohar@gmail.com>

	* wrudf: Fix types passed to more functions

2017-01-21 15:42:45 +0100  Pali Rohár <pali.rohar@gmail.com>

	* wrudf: Fix types

2017-01-21 15:40:23 +0100  Pali Rohár <pali.rohar@gmail.com>

	* mkudffs: Fix types

2017-01-21 15:00:56 +0100  Pali Rohár <pali.rohar@gmail.com>

	* pktsetup: Fix types

2017-01-21 14:55:32 +0100  Pali Rohár <pali.rohar@gmail.com>

	* cdrwtool: Fix types

2017-01-21 14:42:06 +0100  Pali Rohár <pali.rohar@gmail.com>

	* mkudffs: Fix types passed to more functions

2017-01-21 14:40:32 +0100  Pali Rohár <pali.rohar@gmail.com>

	* mkudffs: Fix calling udf_create() function

	  It needs file name with the OSTA unicode compression type in the first byte.

2017-01-21 14:38:18 +0100  Pali Rohár <pali.rohar@gmail.com>

	* mkudffs: Fix types

2017-01-21 14:37:11 +0100  Pali Rohár <pali.rohar@gmail.com>

	* libudffs: Use correct types in unicode functions

2017-01-21 14:10:13 +0100  Pali Rohár <pali.rohar@gmail.com>

	* Revert "wrudf: Fix check for Unallocated Space Bitmap"

	  This reverts commit 585f8923f580f950a4732c7063855d301896d5b1.

	  It broke CDR support which is working without space map.

2017-01-21 13:23:04 +0100  Pali Rohár <pali.rohar@gmail.com>

	* wrudf: Fix types and check for errors in lseek/read/write

2017-01-21 13:19:33 +0100  Pali Rohár <pali.rohar@gmail.com>

	* wrudf: Do not exit if setpriority fails

2017-01-21 13:19:21 +0100  Pali Rohár <pali.rohar@gmail.com>

	* wrudf: Add help command

2017-01-21 13:18:59 +0100  Pali Rohár <pali.rohar@gmail.com>

	* wrudf: Fix crash when parseCmnd() get NULL

2017-01-21 13:17:18 +0100  Pali Rohár <pali.rohar@gmail.com>

	* wrudf: Fix output from decode_utf8

2017-01-21 13:16:39 +0100  Pali Rohár <pali.rohar@gmail.com>

	* wrudf: Show warning that PD_ACCESS_TYPE_OVERWRITABLE is not supported

2017-01-21 13:16:02 +0100  Pali Rohár <pali.rohar@gmail.com>

	* wrudf: Fix check for Unallocated Space Bitmap

2017-01-21 13:15:14 +0100  Pali Rohár <pali.rohar@gmail.com>

	* wrudf: Fail if no PD found

2017-01-21 13:13:29 +0100  Pali Rohár <pali.rohar@gmail.com>

	* wrudf: Allocate packet buffer also for CDRW DISK_IMAGE type

	  Packet buffer is always needed when media type is CDRW

2017-01-21 11:11:01 +0100  Pali Rohár <pali.rohar@gmail.com>

	* wrudf: Fix resource leaks in copyFile and copyDirectory

2017-01-21 11:10:29 +0100  Pali Rohár <pali.rohar@gmail.com>

	* wrudf: Correctly check for errors

2017-01-21 11:09:11 +0100  Pali Rohár <pali.rohar@gmail.com>

	* wrudf: Fix size of array

2017-01-20 12:21:05 +0100  Jan Kara <jack@suse.cz>

	* mkudffs: Properly initialize the first extent

	  Properly initialize the first extent describing disk's space. Otherwise
	  disc->first->blocks can contain random garbage which further confuses
	  code into thinking user has provided desired filesystem length.

	  Signed-off-by: Jan Kara <jack@suse.cz>

2017-01-15 01:25:39 +0100  Pali Rohár <pali.rohar@gmail.com>

	* pktsetup: Fix pktsetup to work

2017-01-12 00:05:25 +0100  Pali Rohár <pali.rohar@gmail.com>

	* pktsetup: Fix resource leak in setup_dev function

2017-01-11 23:50:58 +0100  Pali Rohár <pali.rohar@gmail.com>

	* pktsetup: Fix setup_dev function

	  It did nothing as after init_cdrom() call it returned and ioctl() was not called.

2017-01-11 22:46:50 +0100  Pali Rohár <pali.rohar@gmail.com>

	* pktsetup: Check for mknod errors

2017-01-11 22:45:34 +0100  Pali Rohár <pali.rohar@gmail.com>

	* cdrwtool: Check for Out-of-bounds read

2017-01-11 22:43:41 +0100  Pali Rohár <pali.rohar@gmail.com>

	* cdrwtool: Fix memory leaks

2017-01-11 21:20:40 +0100  Pali Rohár <pali.rohar@gmail.com>

	* mkudffs: Show warning when trying to use more then 2^32-1 blocks

2017-01-11 21:13:42 +0100  Pali Rohár <pali.rohar@gmail.com>

	* mkudffs: Validate block-count parameter

2017-01-11 21:11:29 +0100  Pali Rohár <pali.rohar@gmail.com>

	* mkudffs: Fix printf numeric formats

2017-01-08 12:40:42 +0100  Pali Rohár <pali.rohar@gmail.com>

	* travis: Generare build matrix automatically

2017-01-07 19:12:29 +0100  Pali Rohár <pali.rohar@gmail.com>

	* pktsetup: Fix buffer overflow in get_misc_minor

2017-01-07 19:12:25 +0100  Pali Rohár <pali.rohar@gmail.com>

	* mkudffs: When mkudffs fails show also error message

	  Return value is enough for scripts but not for interactive user.

2017-01-07 19:00:56 +0100  Pali Rohár <pali.rohar@gmail.com>

	* travis: Add .travis.yml for Coverity Scan

2016-12-19 00:24:22 +0100  Pali Rohár <pali.rohar@gmail.com>

	* configure: Remove AC_CHECK_FUNCS as nobody check for presence of those functions

2016-12-19 00:13:29 +0100  Pali Rohár <pali.rohar@gmail.com>

	* mkudffs: Use lseek and off_t

	  AC_SYS_LARGEFILE now takes care to be correctly 64bit.

2016-12-19 00:12:29 +0100  Pali Rohár <pali.rohar@gmail.com>

	* configure: Use AC_SYS_LARGEFILE for large file support

	  This is needed for correct support of large files on 32bit systems.

2016-12-19 00:11:44 +0100  Pali Rohár <pali.rohar@gmail.com>

	* all: Include config.h before any other includes

	  Otherwise macros which change behavior of other includes do not take effect.

2016-07-02 20:44:35 +0200  Pali Rohár <pali.rohar@gmail.com>

	* mkudffs: Fix mktime() usage

	  Function mktime() returns time_t which does not have to be unsigned long
	  int. E.g. on x32 architecture it (signed) long long int.

2016-07-02 18:38:26 +0200  Pali Rohár <pali.rohar@gmail.com>

	* doc/cdrwtool.1: Fix spelling

2016-06-29 19:13:05 +0200  Pali Rohár <pali.rohar@gmail.com>

	* Release version 1.2

2016-06-29 18:39:08 +0200  Pali Rohár <pali.rohar@gmail.com>

	* Makefile.am: Install also README and NEWS files

2016-06-29 18:29:36 +0200  Pali Rohár <pali.rohar@gmail.com>

	* NEWS: Update for 1.1

2016-06-29 18:17:46 +0200  Pali Rohár <pali.rohar@gmail.com>

	* ChangeLog: Remove content of unused file

2016-06-29 18:16:10 +0200  Pali Rohár <pali.rohar@gmail.com>

	* README: Add short text

2016-06-28 22:16:42 +0200  Pali Rohár <pali.rohar@gmail.com>

	* doc/mkudffs.8: Add info about hex values

2016-05-29 14:41:12 +0200  Pali Rohár <pali.rohar@gmail.com>

	* cdrwtool: Fix parsing --file parameter

	  Error reported by Mayhem: https://bugs.debian.org/715720

2016-05-29 13:51:14 +0200  Pali Rohár <pali.rohar@gmail.com>

	* mkudffs: Fix install/uninstall hook for mkfs.udf symlink

2016-05-29 13:50:42 +0200  Pali Rohár <pali.rohar@gmail.com>

	* libudffs: Do not install static libudffs library

2016-05-29 13:50:16 +0200  Pali Rohár <pali.rohar@gmail.com>

	* doc: Correctly install all text documentation files

2016-05-29 13:20:22 +0200  Pali Rohár <pali.rohar@gmail.com>

	* doc: Fix syntax of pktsetup.8 file

2016-05-29 13:12:15 +0200  Pali Rohár <pali.rohar@gmail.com>

	* wrudf: Fix spelling error writeable => writable

2016-05-05 13:40:39 +0000  Steve Kenton <skenton@ou.edu>

	* doc: Add more references to UDF-Specifications

	  IEC/ISO standards normally cost money, add a URL to the free
	  PDF downloads of the co-published versions from ECMA

	  Signed-off-by: Steve Kenton <skenton@ou.edu>

2016-04-20 16:54:22 +0200  Pali Rohár <pali.rohar@gmail.com>

	* Rename bootstrap to autogen.sh

2016-04-08 00:49:27 -0400  Mike Frysinger <vapier@gentoo.org>

	* man: add a mkfs.udf(8) redirect

	  Since mkfs.udf is installed as a symlink, add a man page symlink too.

2016-04-07 22:22:28 +0200  Pali Rohár <pali.rohar@gmail.com>

	* Release version 1.1

	  Remove also old version numbers, contains, etc... and update doc

2016-04-07 22:22:01 +0200  Pali Rohár <pali.rohar@gmail.com>

	* wrudf: Do not link with ncurses library, it is not used

2016-04-05 21:21:51 +0200  Pali Rohár <pali.rohar@gmail.com>

	* mkudffs: Set default uid and gid to 0

	  Linux kernel makes inodes with -1 uid/gid readonly if mount is not called
	  with uid/gid params. So it does not work as expected and cause problems...
	  Rather set uid and git by default to 0.

2016-04-03 12:13:16 +0200  Pali Rohár <pali.rohar@gmail.com>

	* all: Move defaults.h to mkudffs

2016-04-03 12:08:20 +0200  Pali Rohár <pali.rohar@gmail.com>

	* wrudf: Remove defaults.c because it is not used

2016-04-03 12:07:49 +0200  Pali Rohár <pali.rohar@gmail.com>

	* cdrwtool: Remove own copy of defaults.c

2016-04-03 12:06:44 +0200  Pali Rohár <pali.rohar@gmail.com>

	* libudffs: Move file.c to mkudffs

2016-03-28 15:19:20 +0200  Pali Rohár <pali.rohar@gmail.com>

	* doc/mkudffs.8: Fix description for --fullvsid option

2016-03-19 00:33:17 +0100  Pali Rohár <pali.rohar@gmail.com>

	* deb: Remove debian packaging files

2016-03-14 12:18:45 -0500  Steve Kenton <skenton@ou.edu>

	* configure: Remove configure check for getopt.c/h

	  Signed-off-by: Steve Kenton <skenton@ou.edu>

2016-03-14 11:56:14 -0500  Steve Kenton <skenton@ou.edu>

	* getopt: Remove copies of getopt.c/h and use installed versions

	  All the systems we care about should have getopt at this point in time
	  so remove the old copies of getopt.h and getopt.c and use versions in
	  /usr/include and glibc instead

	  Signed-off-by: Steve Kenton <skenton@ou.edu>

2016-03-14 11:56:13 -0500  Steve Kenton <skenton@ou.edu>

	* configure: Rename and tidy configure.in

	  Running automake suggest renaming configure.in -> configure.ac
	  so go ahead and go it. While looking at it remove the now
	  unused open64 check

	  Signed-off-by: Steve Kenton <skenton@ou.edu>

2016-03-13 00:05:32 +0100  Steve Kenton <skenton@ou.edu>

	* all: Assorted comments and doxygen blocks and misc

	  Misc is stuff like move a code block to be consistent between if and else
	  Rename fc->filechars to be consistent with other usage
	  Add the UDF-Specifications reference with never made it in
	  Some minor style changes with initializer as I was documenting functions
	  The Doxygen stuff has not been tested much but it seemed silly not to
	  format the function comments for automatic doc generation while at it

	  Signed-off-by: Steve Kenton <skenton@ou.edu>

2016-03-11 10:09:15 -0600  Steve Kenton <skenton@ou.edu>

	* mkudffs: Comment out the lost+found directory creation

	  The lost+found directory is Unix specific and unexpected on a UDF disc,
	  plus the fact that we don't have a fsck so just comment it out for now.

	  Signed-off-by: Steve Kenton <skenton@ou.edu>

2016-03-11 10:09:14 -0600  Steve Kenton <skenton@ou.edu>

	* mkudffs: Make all modificiation to FE/EFE before calling insert_fid to compute CRCs

	  This worked by accident before because of some redundant insert_fid calls
	  and a peculiar relationship between the <root> and lost+found directories.
	  Move setting uid/gid into udf_create and finish all modifications to the
	  FE/EFE before calling insert_fid to calculate the descriptor CRCs

	  Signed-off-by: Steve Kenton <skenton@ou.edu>

2016-03-08 09:20:41 -0600  Steve Kenton <skenton@ou.edu>

	* mkudffs: Fix a copy/paster error from way back when

	  These make no difference good or bad to the disc formatting but
	  make reading the code much less confusing.

	  Signed-off-by: Steve Kenton <skenton@ou.edu>

2016-03-08 09:20:40 -0600  Steve Kenton <skenton@ou.edu>

	* mkudffs: Minor fixes to make Philips udf_test happier

	  These reduce the number of errors reported by udf_test for a UDF disc
	  Checkpoint is supposed to start at one, not zero and interchange level
	  three seems appropriate as a default.

	  Signed-off-by: Steve Kenton <skenton@ou.edu>

2016-02-15 12:18:28 -0600  Steve Kenton <skenton@ou.edu>

	* mkudffs: Spare table not supported for v1.02

	  Neither spare table nor virtual allocation table are support for v1.02

	  Signed-off-by: Steve Kenton <skenton@ou.edu>

2016-02-15 11:20:09 -0600  Steve Kenton <skenton@ou.edu>

	* doc/mkudffs.8: Update manpage

	  Add DVDRW to the man page and mention some ordering constraings.

	  Signed-off-by: Steve Kenton <skenton@ou.edu>

2016-02-15 10:05:12 -0600  Steve Kenton <skenton@ou.edu>

	* mkudffs: Clarify sizing defaults a bit

	  Add some comments to the default_sizing table and use structure assignment
	  rather than memcpy since it's clearer in this case.

	  Signed-off-by: Steve Kenton <skenton@ou.edu>

2016-02-14 21:43:04 -0600  Steve Kenton <skenton@ou.edu>

	* mkudffs: Remove open/open64 test in main()

	  Largefile support may have still been an issue >10 year ago
	  when udftools development at sourceforge stopped, but these
	  days everything is largefile aware.

	  Signed-off-by: Steve Kenton <skenton@ou.edu>

2016-02-14 20:42:06 -0600  Steve Kenton <skenton@ou.edu>

	* mkudffs: Remove unneeded version check in udf_init_disc

	  Nothing in or called by udf_init_disc cares about FLAG_EFE and
	  this check is already done more completely in udf_set_version
	  so just delete the duplicate version check etc.

	  Signed-off-by: Steve Kenton <skenton@ou.edu>

2016-02-14 20:31:43 -0600  Steve Kenton <skenton@ou.edu>

	* mkudffs: Remove duplicate memset

	  udf_init_disc already does a memset on entry
	  so delete the duplicate memset immediately
	  before the call to udf_init_disc and change
	  and assignment to initialize while at it.

	  Signed-off-by: Steve Kenton <skenton@ou.edu>

2016-02-14 13:34:02 -0600  Steve Kenton <skenton@ou.edu>

	* mkudffs: VAT not supported for v1.02

	  Clear FLAG_VAT for version 1.02 since it's not supported

	  Signed-off-by: Steve Kenton <skenton@ou.edu>

2016-02-12 19:49:45 -0600  Steve Kenton <skenton@ou.edu>

	* mkudffs: Check FLAG_EFE rather than udf_rev

	  I was getting a segmentation fault/core dump with this command line:

	  mkudffs --u8 --udfrev=0x0102 --blocksize=2048 --lvid="HDi-250 DVD" --strategy=4 \
	--media-type=dvdrw --space=unallocbitmap --ad=inicb --noefe /dev/sr0

	  The segfault was caused by a subscript of -1 while lookup for a descriptor
	  but the root cause was using extended file entries on a UDF-1.02 disc
	  where they are not supported. The check for version == 1.50 should have
	  been <= 1.50, but checking for FLAG_EFE is better since it also deals
	  with the --noefe option.

	  Signed-off-by: Steve Kenton <skenton@ou.edu>

2015-07-10 16:06:59 +0200  Jan Kara <jack@suse.com>

	* mkudffs: Fix creation of unalloc table

	  Creation of unalloc table was broken and the table tracked ICB with the
	  table as empty space which was then readily rewritten by the fileset
	  ICB resulting in corrupted filesystem.

	  Fix the problem by recording ICB with unalloc table as used space and
	  also add a check reporting error when too large filesystem with unalloc
	  table should be created instead of creating corrupted fs.

	  Signed-off-by: Jan Kara <jack@suse.com>

2015-07-10 14:15:04 +0200  Jan Kara <jack@suse.com>

	* cdrw-tool: Define HZ if not defined in headers

	  On some older distros, HZ is not defined in expected header files. So
	  define it when needed.

	  Signed-off-by: Jan Kara <jack@suse.com>

2015-07-05 11:30:15 +0200  Pali Rohár <pali.rohar@gmail.com>

	* Fix code to be compatible with C99 inline semantic

	  This commit fix compilation under GCC 5.

2014-12-17 17:31:39 +0100  Pali Rohár <pali.rohar@gmail.com>

	* mkudffs: Add symlink for mkfs.udf

2014-12-17 16:37:47 +0100  Pali Rohár <pali.rohar@gmail.com>

	* Install mkudffs, pktsetup and wrudf to sbin (instead bin)

2014-12-17 13:13:44 +0100  Pali Rohár <pali.rohar@gmail.com>

	* mkudffs: Add support for setting uid and gid of the root directory

	  By default uid and gid will be -1. Before this patch it was 0.

2014-12-16 22:22:00 +0100  Pali Rohár <pali.rohar@gmail.com>

	* doc/mkudffs.8: Add info about label and uuid

2014-12-16 22:07:43 +0100  Pali Rohár <pali.rohar@gmail.com>

	* mkudffs: Add support for label and uuid options

	  New option --label (and -l) is just synonym for options --lvid and --vid. UDF
	  specification says that Logical Volume Identifier is name which is typically
	  displayed to the user. Other UDF software and also other OS are using field
	  Logical Volume Identifier as label or disc name, so mkudffs should do it too.
	  But Linux library libblkid (part of linux-utils package) read label from field
	  Volume Identifier. So for compatibility we need to set both --lvid and --vid
	  options to be same.

	  New option --uuid (and -u) set first 16 chars of Volume Set Identifier. UDF FS
	  does not have any UUID field in specification, but first 16 chars of Volume Set
	  Identifier perfectly fit for UUID definitions. UDF specification says that it
	  should be set to unique value which is not trivial and not fixed.

	  New option --fullvsid set full Volume Set Identifier. Option --vsid also before
	  this patch set only second part of Volume Set Identifier, so it was not possibe
	  to set full string in Volume Set Identifier. To not bring regressions, use new
	  option --fullvsid. When used this option overwrite previous --uuid and --vsid
	  options.

	  This patch also adds code which print filename, label, uuid, blocks, blocksize
	  and udfrev when mkudffs starts creating UDF filesystem.

2014-12-16 22:07:06 +0100  Pali Rohár <pali.rohar@gmail.com>

	* doc/mkudffs.8: Update block-size

2014-12-16 22:06:10 +0100  Pali Rohár <pali.rohar@gmail.com>

	* mkudffs: Set default block-size to device logical block (sector) size

2014-12-16 21:59:29 +0100  Pali Rohár <pali.rohar@gmail.com>

	* mkudffs: Set first 16 chars of Volume Set Identifier to timestamp and random value

	  According to UDF specification, first 8 chars should be timestamp (hexadecimal
	  number) and second 8 chars should be non trivial and non fixed value. We will
	  set it to random hexadecimal number (from /dev/urandom).

2014-12-16 17:23:55 +0100  Pali Rohár <pali.rohar@gmail.com>

	* pktsetup: Check for return value of system function

2014-12-16 17:10:55 +0100  Pali Rohár <pali.rohar@gmail.com>

	* pktsetup: Do not crash if is called with invalid number of arguments

2014-12-16 17:00:50 +0100  Pali Rohár <pali.rohar@gmail.com>

	* cdrwtool: Check for return value of wait_cmd() in sig_progress()

2014-12-16 16:57:50 +0100  Pali Rohár <pali.rohar@gmail.com>

	* cdrwtool: Fix support for bigendian systems

2014-12-16 16:27:24 +0100  Pali Rohár <pali.rohar@gmail.com>

	* wrudf: Fix support for bigendian systems

2014-12-16 13:51:22 +0100  Pali Rohár <pali.rohar@gmail.com>

	* wrudf: Remove unused variable rv

2014-12-16 13:42:43 +0100  Pali Rohár <pali.rohar@gmail.com>

	* wrudf: Check return value of system and chdir calls

2014-12-16 11:01:07 +0100  Pali Rohár <pali.rohar@gmail.com>

	* wrudf: Make sure that name will be NUL termined

2014-12-16 10:56:40 +0100  Pali Rohár <pali.rohar@gmail.com>

	* mkudffs: Show error message when --u8/--u16/--utf8 option is not specified as first argument

2014-12-16 09:50:59 +0100  Pali Rohár <pali.rohar@gmail.com>

	* mkudffs: Remove unused variables

2014-12-16 09:50:11 +0100  Pali Rohár <pali.rohar@gmail.com>

	* mkudffs: Do not ignore lseek error in write_func()

2014-12-15 22:45:01 +0100  Pali Rohár <pali.rohar@gmail.com>

	* mkudffs: Check if --lvid, --vid, --vsid and --fsid options are not too long

2014-12-15 22:41:15 +0100  Pali Rohár <pali.rohar@gmail.com>

	* mkudffs: Check if device has enough blocks for formatting

2014-12-15 22:19:47 +0100  Pali Rohár <pali.rohar@gmail.com>

	* mkudffs: Check for return value from functions next_extent, prev_extent, next_extent_size, prev_extent_size

	  These functions could fail (return 0 or NULL) and we should not continue

2014-12-15 22:15:17 +0100  Pali Rohár <pali.rohar@gmail.com>

	* mkudffs: Fix reading from uninitialized memory

	  Properly initialize reserved field, because malloc does not initialize it

2014-12-15 21:50:52 +0100  Pali Rohár <pali.rohar@gmail.com>

	* mkudffs: Fix buffer overflow when calling with --vsid= option

2014-12-15 21:45:00 +0100  Pali Rohár <pali.rohar@gmail.com>

	* mkudffs: It accept also -h

2014-12-15 21:28:36 +0100  Pali Rohár <pali.rohar@gmail.com>

	* mkudffs: Add support for reading blocks of regular file via fstat

2014-12-15 21:28:12 +0100  Pali Rohár <pali.rohar@gmail.com>

	* mkudffs: Use new ioctl BLKGETSIZE64 in function get_blocks

2014-12-15 20:29:34 +0100  Pali Rohár <pali.rohar@gmail.com>

	* mkudffs: Include sys/ioctl.h, linux/fs.h and linux/fd.h files

	  They are needed for BLKGETSIZE and FDGETPRM ioctl calls

2014-12-15 16:59:39 +0100  Pali Rohár <pali.rohar@gmail.com>

	* mkudffs: Check for errors after calling open

2014-12-14 22:55:41 +0100  Pali Rohár <pali.rohar@gmail.com>

	* libudffs: Fix decoding to utf8, stop at first nul utf8 byte

2014-12-14 22:21:22 +0100  Pali Rohár <pali.rohar@gmail.com>

	* libudffs: Fix decoding to utf8, first byte contains compression code

2014-12-14 21:44:07 +0100  Pali Rohár <pali.rohar@gmail.com>

	* libudffs: Fix buffer overflow in encoding unicode strings

2014-12-14 20:47:31 +0100  Pali Rohár <pali.rohar@gmail.com>

	* libudffs: Do not allow overwriting smaller blocks in function set_extent

2014-12-14 20:46:20 +0100  Pali Rohár <pali.rohar@gmail.com>

	* libudffs: Fix function prev_extent_size

2014-12-14 20:43:38 +0100  Pali Rohár <pali.rohar@gmail.com>

	* libudffs: Fix reading from invalid memory

	  Increase buffer length for one unsigned long which is needed by udf_alloc_bitmap_blocks

2014-12-13 22:51:42 +0100  Pali Rohár <pali.rohar@gmail.com>

	* libudffs: Fix utf8 decode and encode

2014-12-13 21:41:14 +0100  Pali Rohár <pali.rohar@gmail.com>

	* doc/mkudffs.8: Update manpage to reflect default settings

2014-12-13 17:34:10 +0100  Pali Rohár <pali.rohar@gmail.com>

	* udfct: Remove empty udfct from tree

2014-12-13 17:10:01 +0100  Pali Rohár <pali.rohar@gmail.com>

	* udffsck: Do not install binary, it is only empty stub

2014-12-13 17:09:57 +0100  Pali Rohár <pali.rohar@gmail.com>

	* udffsck: Remove defaults.c file which is not needed

2014-12-13 17:09:38 +0100  Pali Rohár <pali.rohar@gmail.com>

	* Remove .cvsignore files

2014-12-13 01:02:39 +0100  Pali Rohár <pali.rohar@gmail.com>

	* wrudf: Fix errors reported by Coverity static analysis tool

2014-12-13 01:02:27 +0100  Pali Rohár <pali.rohar@gmail.com>

	* mkudffs: Fix errors reported by Coverity static analysis tool

2014-12-13 01:02:13 +0100  Pali Rohár <pali.rohar@gmail.com>

	* cdrwtool: Fix errors reported by Coverity static analysis tool

2014-12-13 00:39:33 +0100  Magnus Granberg <zorry@ume.nu>

	* pktsetup: Remove nonsense O_CREAT flag

	  This patch comes from Gentoo project

2014-12-13 00:35:10 +0100  Ben Peddell <klightspeed@klightspeed.is-a-geek.net>

	* cdrwtool: Fix CD blanking for kernels 2.6.8 and newer

	  Write access is required to perform blanking commands

	  This patch comes from Gentoo project

2014-12-12 23:27:41 +0100  Frantisek Kluknavsky <fkluknav@redhat.com>

	* doc: Update manpages

	  This patch comes from Fedora project

2014-12-12 23:25:25 +0100  Frantisek Kluknavsky <fkluknav@redhat.com>

	* doc: Add wrudf manpage

	  This patch comes from Fedora project

2014-12-12 23:24:25 +0100  Frantisek Kluknavsky <fkluknav@redhat.com>

	* wrudf: Add basic help

	  This patch comes from Fedora project

2014-12-12 23:22:33 +0100  Honza Horák <hhorak@redhat.com>

	* libudffs: Fix null pointer dereference

	  Test case:
	  $ dd if=/dev/zero of=udf.iso bs=2048 count=100
	  $ mkudffs udf.iso
	  Segmentation fault

	  This patch comes from Fedora project

2014-12-12 17:01:10 +0100  Henrique de Moraes Holschuh <hmh@debian.org>

	* pktsetup: return meaningful exit status on errors

	  pktsetup seems to always return exit status 0 (ok) even when something goes wrong.

	  Stuff like:
	    trying to register an already registered device
	    trying to de-register an unbound device

	  should return a non-zero exit status.

	  This patch comes from Debian project

2014-12-12 17:00:07 +0100  Richard Atterer <atterer@debian.org>

	* doc: Add HOWTO.udf

	  This documentation text comes from Debian project

2014-12-12 16:52:41 +0100  Richard Atterer <atterer@debian.org>

	* doc: Update manpages

	  This patch comes from Debian project

2007-09-27 16:33:21 +0000  Harald Hoyer <harald@redhat.com>

	* even more compile fixes

2007-09-27 16:32:32 +0000  Harald Hoyer <harald@redhat.com>

	* more compile fixes

2007-09-27 16:31:20 +0000  Harald Hoyer <harald@redhat.com>

	* fix some compile warnings

2007-09-27 16:29:49 +0000  Andreas Jochens <aj@andaco.de>

	* With the attached patch 'udftools' can be compiled
	  on amd64 using gcc-4.0.

2007-09-27 16:28:25 +0000  Harald Hoyer <harald@redhat.com>

	* make tagSerialNum bigendian compatible

2007-09-27 16:26:22 +0000  Peter Osterlund <petero2@telia.com>

	* And here is a patch for udftools-1.0.0b3 that updates the pktsetup
	  program to make it able to use the character device for block device
	  setup/teardown.

2004-03-02 02:09:39 +0000  Ben Fennema <bfennema@falcon.csc.calpoly.edu>

	* add missing byte swap to two numPartitionMaps uses

2004-02-27 00:04:36 +0000  Ben Fennema <bfennema@falcon.csc.calpoly.edu>

	* update date

2004-02-27 00:02:53 +0000  Ben Fennema <bfennema@falcon.csc.calpoly.edu>

	* fix shared build

2004-02-26 23:46:22 +0000  Ben Fennema <bfennema@falcon.csc.calpoly.edu>

	* pull version from configure.ac

2004-02-26 23:45:50 +0000  Ben Fennema <bfennema@falcon.csc.calpoly.edu>

	* fix building outside of the directory

2004-02-23 03:35:33 +0000  Ben Fennema <bfennema@falcon.csc.calpoly.edu>

	* check udf_rev and not disc->udf_rev for version info

2004-02-23 03:33:11 +0000  Ben Fennema <bfennema@falcon.csc.calpoly.edu>

	* pass write results back through calling function

2003-10-24 01:52:14 +0000  Ben Fennema <bfennema@falcon.csc.calpoly.edu>

	* configure cleanups with udfct directory

2003-10-24 01:16:04 +0000  Ben Fennema <bfennema@falcon.csc.calpoly.edu>

	* add optional size to -q

2003-10-24 01:10:31 +0000  Ben Fennema <bfennema@falcon.csc.calpoly.edu>

	* update

2003-10-24 01:04:14 +0000  Ben Fennema <bfennema@falcon.csc.calpoly.edu>

	* use inttypes.h

2003-10-24 01:03:39 +0000  Ben Fennema <bfennema@falcon.csc.calpoly.edu>

	* updated

2003-10-24 01:03:19 +0000  Ben Fennema <bfennema@falcon.csc.calpoly.edu>

	* autoconf updates

2003-10-24 00:05:47 +0000  Ben Fennema <bfennema@falcon.csc.calpoly.edu>

	* updated

2003-10-24 00:05:13 +0000  Ben Fennema <bfennema@falcon.csc.calpoly.edu>

	* added to bootstrap the cvs repository

2002-12-28 04:48:51 +0000  Ben Fennema <bfennema@falcon.csc.calpoly.edu>

	* set grow bit to 0

2002-02-09  Ben Fennema <bfennema@falcon.csc.calpoly.edu>

	* Added man pages from Paul Thompson <set@pobox.com>

2002-01-30  Ben Fennema <bfennema@falcon.csc.calpoly.edu>

	* Initial Release
